home *** CD-ROM | disk | FTP | other *** search
- From: HAWK@blanker.ruhr.de (Peter Elzner)
- Date: Wed, 10 Jan 96 21:16:53 +0100
- X-Mailer: Zodiac's Point 37.204 [REGISTERED 001A] via ANUBIS V 0.555a / ZSort V 1.44c
- Message-ID: <zpfaa8aC4QoNZ1a@blank1.blanker.ruhr.de>
- Organization: neXus
- X-ZC-Post: Grudene 6a;58644 Iserlohn;German
- X-ZC-Telefon: V+49-2374-8442
- X-ZC-Charset: ISO
- X-ZC-F-TO: Dale Curri
- X-Gateway: ZCONNECT blanker.ruhr.de [UUSamm 1.26b (28.12.95)]
- MIME-Version: 1.0
- Content-Type: text/plain; charset=ISO-8859-1
- Content-Transfer-Encoding: 8bit
- Subject: Re: A3000 SCSI questions
- Newsgroups: comp.sys.amiga.hardware
- Path: blanker.ruhr.de!BLANK1
- References: <4crkgh$ct6@bmerhc5e.bnr.ca> <dalec.03yl@zorro.amitrix.com>
-
- dalec@zorro.amitrix.com (Dale Currie) wrote:
-
- > > 1)I was under the impression that SCSI buses required the all the termination
- > > resistor packs be removed except the last one in the chain. Is this required
- > > or is it just a recommendation? What are the issues of not removing them?
- >
- > It is required, IF you want reliable operation, as you have discovered, and
- > it's the last device on each end of the chain that needs termination.
-
- Well, as I said in another msg, I'm getting read-write errors if I
- terminate the drives as suggested (only the last drive on both sides).
-
- I'm now terminating every drive and it works fine.
-
- No one has been able to explain this to me.
-
- Peter Elzner [Hawk@blanker.ruhr.de]
- ---------------------< neXus support center >------------------------------
- Microsoft isn't the answer. Microsoft is the question and the answer is NO
-